PARLANTE JBL CONTROL 25-1L NEGRO

Control 25-1L

Compact 8-Ohm Indoor/Outdoor

Background/Foreground Speaker

Compact 8-Ohm Indoor/Outdoor

Background/Foreground Speaker

The Control® 25-1L is a two-way 5-¼” speaker with rich sonic character, wide coverage, consistent dispersion, versatile mounting, and a contemporary high-design look that fits into a wide range of decors. This makes Control 25-1L an excellent choice for a wide variety of applications, including retail stores, restaurants, health clubs, theme parks, educational facilities, hospitality, music cafes, leisure venues, and anywhere where a top quality high-output indoor/outdoor foreground/background music (and/or paging) speaker is required.

 

• 5-¼” woofer with woven fiberglass cone
• 3/4” PEI diaphragm tweeter with fluid cooling
• Contemporary, high-design appearance
• Built-in InvisiBall® mounting hardware, plus available U-bracket
• Weather resistant enclosure and transducers
• Wide 100° x 100° coverage
• 100 Watt power handling (200 Watt program)
• High fidelity sound character with broad frequency response of 60 Hz – 20 kHz.
• Frequency Range (-10 dB)            60 Hz to 20 kHz

                Frequency Response (+/-3 dB)   85Hz - 17 kHz

                Power Rating2   200 W Continuous Program (2 hrs)

                Maximum Input Voltage              25.3 V RMS (2 hrs), 50.6 V peak

                Maximum SPL3110 dB ave. Continuous Pink Noise (116 dB peak)

                Sensitivity4         90 dB, 1W/1m (ave. 100 Hz – 10 kHz)

                Coverage Angle5             100° x 100°

                Directivity Factor (Q)      6.04 (averaged 1kHz – 16kHz)

                Directivity Index (DI)      7.6dB (averaged 1kHz – 16kHz)

                Nominal Impedance      8 ohms

                Crossover Type2nd order low-pass, 3rd order high-pass

                Recommended Protective High-Pass6   60 Hz high-pass (24 dB/oct)

                Low Frequency Driver   135 mm (5.25 in), woven-fiberglass cone with pure butyl rubber surround with Weather-Edge frame protection, high-temp fiberglass voice coil former, high-temp voice coil wire, optimized cone geometry, linear suspension spider, and FEA optimized motor structure.

                High Frequency Driver  19 mm (0.75 in) PEI diaphragm, low-viscosity ferro-magnetic fluid, and lightweight Kapton™ voice coil former.

                Enclosure Material          High Impact Polystyrene (HIPS), painted with highly-UV resistant paint on white (-WH) version for maximum UV fade resistance.

                Grille     Highly zinc-plated, finished in durable TGIC polyester powdercoating. MTC-25WMG-1 (&-WH) available with WeatherMax™ multi-layer foam and tight-weave mesh vapor barrier backing.

                Installation         InvisiBall wall-mounting system included. Two 6 mm attachment points (on top and bottom) for optional MTC-25UB-1 (&-WH) U-bracket. Secondary safety attachment loop point on back panel.

                Environmental  IP-44 per IEC529 (IP-55 when installed with the optional MTC-25WMG-1 WeatherMax™ grille and either MTC-PC2 or MTC-PC3 panel cover.) Exceeds MilSpec 810 for humidity, salt-spray, temperature & UV. Passes MilStd-202F for salt spray and ASTM G85 for acid-air plus salt spray. Optional MTC-25WMG-1 WeatherMax™ grille for breaking up driving rain and for especially difficult environments.

                Termination       Screw-down terminal strip, zinc-plated copper based, nickel-plated metal screws and washers. Accepts up to 9 mm outside 4 mm inside open lugs (#6, #8, or #10 lug), plus bare wire (up to 12 AWG / 2.5 mm2). Optional MTC-PC2 and MTC-PC3 protective panel covers available to provide sealed entrance for additional weather protection.

                Agency Rating   ROHS-compliant

                Colors   Black (RAL9004) or white (-WH, RAL9016)

                Dimensions (H x W x D)7              243 x 188 x 145 mm (9.6 x 7.4 x 5.7 in); 203 mm (8.0 in) deep total when mounted on InvisiBall wall-mount bracket.

                Net Weight         3.0 kg (6.7 lbs)

                Shipping Weight              7.3 kg (16.0 lbs) for the pair-pack (for 2 speakers)

                Included Accessories     InvisiBall™ wall-mounting system, 6 mm x 100 mm hex key

                Optional Accessories     MTC-25UB-1 – Yolk-type U-bracket (&-WH)

 

¹ In half-space (on-wall, 2π).

² Continuous Pink Noise rating is IEC-shaped pink noise with a 6 dB crest factor. Continuous Program Power is defined as 3 dB above the Continuou Pink Noise Rating and is a conservative expression of the system’s ability to handle normal speech and music program material.

3 Calculated from sensitivity and power handling, exclusive of power compression.

4 Half-space (on-wall) averaged 100 Hz – 10 kHz, 2.83V.

5 Coverage angle (-6 dB) average between 1 kHz and 12 kHz.

6 For protection against driving below resonant frequency and to keep transformer out of saturation.

7 In vertical orientation