The HXR-NX100 incorporates a 1"-type Exmor R CMOS sensor with 14.2 million effective pixels, which is approximately the same size as Super 16mm film frame. The R designation signifies that this is a backside illuminated sensor, which places the circuitry behind the photosites, allowing more light to reach the sensors and resulting in greater low-light sensitivity.

The 1"-type sensor offers more shallow depth of field than the 1/2.88"-type or smaller sensors.

The HXR-NX100 is supplied with a fixed 12x 29mm wide-angle Sony G lens. The 12x optical zoom can be doubled to 24x with Clear Image Zoom, and the Digital Extender function can double this range again by up to 48x zoom.

The camcorder records using the AVCHD 2.0 codec for Full HD 1920 x 1080 resolution video at frame rates of 24p, 30p, 60i, and 60p. The camcorder also offers 720p60 AVCHD capture, 2x slow-motion and 60x quick-motion recording, and standard-definition DV recording. The two SD card slots enable simultaneous or relay recording.

The three lens rings enable smooth, natural adjustment of focusing, zooming, and iris control. It can also be used in full-auto mode or completely manual for maximum creative control.

The HXR-NX100 is equipped with an ND Filter function, allowing you to choose four conventional mechanical ND filter positions (Clear, 1/4ND, 1/16ND, and 1/64ND) for better exposure and depth of field control.

The HXR-NX100 is equipped with two memory card slots, one of which is for SDHC/SDXC cards only, while the other slot is compatible with SDHC/SDXC and Memory Stick PRO Duo (Mark 2)/Memory Stick PRO-HG Duo cards. Please note that, because of the data rate and file structure required for XAVC S recording, you must use a separately available Class 10-rated SDXC media card to record XAVC S.

Two media slots can be used to record in either "SIMUL" or "RELAY" mode. "SIMUL" mode permits simultaneous recording to two memory cards, while the "RELAY" mode automatically switches recording from the first to the second memory card when the first is full.

You can set up the two Start/Stop buttons on the HXR-NX100, one on the grip and one on the camcorder body, to independently start and stop recording on different memory cards while recording in "SIMUL" mode.

The MI Shoe expands your options to use accessories without cables, such as the optional HVL-LBPC Video Light or UWP-D wireless microphone series.

The HXR-NX100 incorporates a 0.24"-type 1550K-dot EVF and 3.5"-type 1550K-dot LCD.

The HXR-NX100 records AVCHD and DV, suitable for conventional workflow, and newly implemented XAVC S 50 Mb/s, which realizes better image quality.

You can fine-tune the look of movies before shooting by adjusting up to 99 parameters such as gamma, knee, black level, color model/level/phase and more. Adjusted parameters can be saved along with other settings as a profile, and up to six profiles can be stored for later recall.

You can copy the settings from one HXR-NX100 to another HXR-NX100, so the user can shoot with multiple cameras in the same settings. The picture profiles only work with the same model of camera.